HomeWizard3.10.2 - App Store
Sie können Ergebnisse sehen in einige Sekunden.
Herausgeberbeschreibung
Mit dem HomeWizard haben Sie mehr Komfort und Sicherheit in Ihrem Haus. Sie können alles mit Ihrem iPhone oder iPad bedienen. Schalten Sie Lampen an oder aus, sehen Sie, wer vor Ihrer Haustür steht, öffnen und schließen Sie Ihre Rollos und noch viel mehr. Auch Kameras lassen sich mit dem HomeWizard bedienen. Es gibt sehr viele verschiedene Möglichkeiten!
Die HomeWizard App können Sie benutzen, wenn Sie in dem Besitz einer HomeWizard Box sind.
Sie können den HomeWizard mit anderen kabellosen Geräten von verschiedenen Herstellern, wie COCO, Cresta, TFA, Somfy, Foscam, Elro und Watcherr benutzen. Hierdurch ist es möglich Lampen an oder aus zu stellen und eine Push-Benachrichtigung zu bekommen, wenn jemand auf die Türklingel gedrückt hat. Zudem können Sie Daten von Ihrer Wetterstation empfangen und direkt Ihren Energieverbrauch auf Ihren iPhone überprüfen. Sie können ebenfalls elektrische Gardinen, Markisen und Garagentore bedienen. Die App funktioniert innerhalb Ihres eigenen WLAN Netzwerkes, aber auch von extern.
-Schalten Sie Lampen oder andere elektrische Geräte mit kabellosen Schaltern.
-Sehen Sie Live über die Kamera, was in Ihr Haus passiert.
-Benutzen Sie ’Szenes’ um mehrere Lampen gleichzeitig durch einmaliges betätigen zu Schalten und benutzen Sie die Schaltzeituhr um Ihre Schalter zu automatisieren.
-Mit unseren Signalisierungssystem, wissen Sie immer was in und um Ihrem Haus passiert:
Sie erhalten eine Push-Benachrichtigung wenn eine Tür oder ein Fenster geöffnet wird, oder wenn ein Bewegungssensor, die Türklingel oder ein Rauchmelder aktiviert wird.
-Binden Sie ‚Aktionen’ an bestimmte Bedingungen. Zum Beispiel: alle Lampen müssen zwischen 24.00 und 07.00 Uhr einschalten, wenn eine Bewegung im Flur erkannt wird. Die Lampen müssen nach 5 Minuten automatisch wieder ausgeschaltet werden.
-Erhalten Sie ein detaillierte Liste auf welcher Sie sehen können wann eine Tür oder Fenster geöffnet wurde oder ein Bewegungssensor aktiviert wurde.
-Dimmen Sie die Lampen mit einer „Slidebar“ in der App.
-Empfangen Sie die Daten (Temperatur, Wind, Regen und UV-Strahlung) von Ihrer eigenen Wetterstation. Sie können auch Grafiken von den Vergangenen Tagen aufrufen.
-Sie können Ihren aktuellen Energieverbrauch direkt anschauen und Grafiken über den täglichen und wöchentlichen kWh Verbrauch aufrufen. Schließen Sie Sonnenkollektoren an um zu sehen wie viel Energie Sie sparen.
-Es ist möglich die RTS Motoren von Somfy zu bedienen. Diese werden oft zum bedienen für elektrische Markisen, Gardinen und Garagentore benutzt.
*Verfügbar: www.homewizard.de
Der HomeWizard sorgt dafür, dass alles einfach angeschlossen werden kann, bezahlbar ist und vor allem eine Menge Spaß macht.
Im Gegensatz zu anderen Marken, entstehen bei dem HomeWizard keine Extra Kosten. Unsere Kunden sind uns sehr wichtig und darum stellen wir regelmäßig Updates zur Verfügung. Entdecken Sie selbst!
Über HomeWizard
Das Unternehmen, das HomeWizard entwickelt, ist HomeWizard B.V.. Die neueste vom Entwickler veröffentlichte Version ist 3.10.2.
Um HomeWizard auf Ihrem iOS-Gerät zu installieren, klicken Sie einfach auf die grüne Schaltfläche Weiter zur App oben, um den Installationsvorgang zu starten. Die App ist seit 2018-04-09 auf unserer Website gelistet und wurde 0 Mal heruntergeladen. Wir haben bereits geprüft, ob der Download-Link sicher ist; zu Ihrem eigenen Schutz empfehlen wir jedoch, die heruntergeladene App mit Ihrem Antivirusprogramm zu scannen. Ihr Antivirusprogramm kann HomeWizard als Malware erkennen, wenn der Download-Link defekt ist.
So installieren Sie HomeWizard auf Ihrem iOS-Gerät:
- Klicken Sie auf unserer Website auf die Schaltfläche Weiter zur App. Dadurch werden Sie zum App Store weitergeleitet.
- Sobald HomeWizard im iTunes-Eintrag Ihres iOS-Geräts angezeigt wird, können Sie den Download und die Installation starten. Tippen Sie rechts neben der App auf die Schaltfläche LADEN, um den Download zu starten.
- Wenn Sie nicht in der iOS App Store App angemeldet sind, werden Sie nach Ihrer Apple-ID und/oder Ihrem Passwort gefragt.
- Nachdem HomeWizard heruntergeladen wurde, sehen Sie rechts einen INSTALLIEREN-Button. Tippen Sie darauf, um die eigentliche Installation der iOS-App zu starten.
- Sobald die Installation abgeschlossen ist, können Sie auf die Schaltfläche ÖFFNEN tippen, um sie zu starten. Das Symbol wird außerdem zum Startbildschirm Ihres Geräts hinzugefügt.
Programmdetails
Systemanforderungen
Download-Informationen
Preisgestaltung
Versionsgeschichte
Version 3.10.2
veröffentlicht am 2018-04-09
* Deaktiviert den Shop in App-Funktion. Sie werden nun in Ihrem Web-Browser zu unserem Shop weitergeleitet, nachdem Sie im Menü auf die Shop-Zeile geklickt haben.
Version 3.10.2
veröffentlicht am 2026-10-14
Version History * Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu. 3.10.2 04/09/2018 * Adds lastSeen and lowBattery status to the Smartwares Door / Window sensor log screen 3.10.1 03/29/2018 ** A firmware update for the HomeWizard will follow in the coming days that adds these capabilities **
Features:
* Adds support for the Smartwares Door / Window sensor
It has all the same features of a regular contact sensor in the app.
* Adds support for the Smartwares Energy Socket
It has all the same features of a regular switch in the app.
* Adds support for the Smartwares Dimmer Socket
It has all the same features of a regular dimmer in the app.
The only major difference is that it is all controlled over 868 instead of 433. 3.10.0 03/23/2018 * Resolves a navigation bar rendering issue when running on iPhone X 3.9.1 12/06/2017 * Adds support for our new Remote
You can now pair it with the HomeWizard so that the remote
can be used to cycle between presets.
You can find it under the Switches & lights category.
When editing, all remotes are found at the top of the list
under the Switches and lights category in Manage Devices.
Important! Please be aware that due to the nature of the Remote, it
is added as a sensor and such is also bound to that sensor
limit and not that of the switches limit. So if you have
reached the limit of 20 kakusensors, then you must remove
a motion/light/contact/smoke/water or doorbell sensor and
not a switch.
* Fixes various translation issues.
* Fixed a number of memory issues. 3.9.0 08/21/2017 * Philips Hue Lights and the Connected LED Lights can now be controlled using the (previously Connected Color LED Light exclusive) color picker.
* This picker is accessible when tapping the color button on the Dashboard/Scene Detail views, when setting up an action and when adding such a device to a scene.
* It is now finally possible to store color presets for Philips Hue Lights, the values are shared between this and the Connected Color LED Lights.
* Modal views on iPad are now sliding in from the bottom instead of flipping in from the center.
* Less frequent error messages when interacting the the Color LED brightness slider.
* Fixes various bugs with Connected Color LED Lights. 3.8.2 04/25/2017 Improved support for Smartwares color LEDs 3.8.0 03/02/2017 Resolved issue with no snapshots for Smartwares Cameras 3.7.3 12/08/2016 - Compatibility with Smartwares Smart Lights and Smartwares Smoke detectors 3.7.1 08/24/2016 - Added support for Smartwares 868MHz smoke detector
- Added support for Foscam Cameras 9xxx Series
- Resolved EnergyLink Graphs issues
- Resolved issue with Phillips Hue support 3.7.0 05/31/2016 Improved the Apple Watch experience
Resolved a number of stability issues
Resolved issues with EnergyLink graphs 3.6.0 05/09/2016 New Features
- Added support for Connected LED Lights
- Added generic support for Foscam FI9xxx series cameras
- Increased maximum WP for solar panels
Bugs
- Resolved issues with linking between the Cameras App and Homewizard App
- Resolved issues with timezone handling
- Resolved a number of performance issues 3.5.0 03/07/2016 Added support for Smartwares IP cameras (powered by HomeWizard Easy Online)
Improved IP Camera UI controls
Improved Water detector UI
Improved text labels for curtains/blinds
Last version supporting iOS 5 devices 3.4.0 11/25/2015 New features
- Users can select the Geofence radius.
- Users can disable/enable the Geofence notifications.
- Enabled Geofence for iOS7 devices.
- Added support for Smartwares leakage detector. 3.3.0 09/28/2015 New Features
- Added Geofence functionality: automatically switch Presets based on your location. For more information please check http://homewizard.com/geofence
* This feature is only available on iOS devices running iOS 8 or higher (excluding iPad devices)
- Added Apple Watch app with Presets support: allows you to directly change Preset from your Apple Watch.
- Added the option to evaluate a Task at its start time.
Improvements
- Resolved a number of issues with IP cameras in Scenes. 3.2.0 08/21/2015 Features
* Improved Tasks view (previously Schedule)
We’ve implemented a number of changes to the interface to show (more) information in a better, more structured way.
The tasks are now grouped based on type and the time tasks are now ordered according to their start time.
The option to filter on preset has been added.
Also note that the Tasks menu item now only appears when all the necessary data has been fetched from your HomeWizard.
* Regrouped devices.
Implemented new categories and groupings of devices. For example, all Asun, Brel and Somfy devices are now under the Blinds and Curtains category.
* Improved managing your devices.
We’ve merged the Add and Edit devices into a single view called Manage Devices.
Fixes / Improvements:
* Improved iPhone 6 compatibility.
* Fixed Invited Smart Lock display on the Dashboard.
* Applied vibration and sound feedback when controlling Blinds and Curtains devices.
* Fixed a bug when toggling presets on the Dashboard while the app is still booting up.
* Tapping on an in-app notification will now also stop the sound again.
* Now accepting all characters for a coupon code.
* Added Curtains to the Blinds and Curtains category.
* When viewing a camera stream, we now by default start with the HD (RTSP) stream instead of the low quality MJPEG stream. 3.1.0 07/06/2015 * Added progress dialog when deleting sensors.
* Fixed an issue with editing code triggers.
* Menu button now always stays enabled.
* Fixed issue with deleting notification receivers under Account.
* Fixed a couple of crashes.
* Updated translations. 3.0.1 04/28/2015 New features and general improvements
* HomeWizard Presets: introduced the ability to set you HomeWizard into four different modes based on which you can truly program your house
* HomeWizard Tasks: if..then..based programmable events with multiple actions and notifications
* HomeWizard Schedule: comprehensive overview of all HomeWizard Tasks throughout the week
* Re-organized device grouping and categorization when adding devices
* New Account menu: all profile related activities grouped under one item
* Improved support for Invited Smart Locks
* Improved support for Brel Motors remotes
* Resolved issue with summer/winter times
* Resolved issue with Wattcher one-day statistics
* Resolved issue with wind speed measurement
* Resolved a number of small bugs and optimizations
* Resolved issue with actions for Somfy move-to-favourite-position
* Resolved issue with failure to fetch sensor data
* Resolved issue with incorrectly parsing log data for awareness sensors
* Added support for x64 bit devices
* Minimum iOS version required raised to 5.1.1 3.0.0 04/14/2015 * Fixed an issue with sharing you exact location using Shared Weather.
If you have experienced problems with your weather station not being positioned on the correct location on the map then please correct this using the following steps:
1) Go to Share Settings.
2) Tap on Location.
3) Wait for your location to be shown on the map and that "Share Exact Location" is turned on.
4) Tap the save button.
5) When back on the Share Settings screen, tap save again.
This should fix the issue.
Also, since the data is cached on our server it might take some time for the changes to be visible. This can take up to a day.
* Fixed various issues with parsing IP Switch urls.
* Fixed save button issues when editing IP Switches.
* Fixed an issue with the "my location" button on the Shared Weather Map on devices running iOS 8.
* Reverted upgrade of the VLC Media Library we use to playback video streams due to issues with the iPad 1 running iOS 5.
* Renamed LoXX to Invited Smart Lock.
* Fixed a couple of crashes. 2.9.10 03/04/2015 New Features
- Added support for Brel Curtains (http://www.brel-motors.nl/)
- Improved Loxx support and integration
Improvements
- Numerous application internal improvements
- Added x64 OS support
- Optimised IP Camera screens
- Resolved a number of issues with pop-ups in iPad
- Resolved a number of graphical issues for iPhone 6 and iPhone 6 Plus 2.9.9 01/27/2015 Release notes 2.9.8
Features:
* Improved iPhone 6 and iPhone 6 Plus support.
* Added sensor icons to the Home screen.
* Added low battery status for the 868 MHz weather sensors and the Wattcher.
This will be indicated by a small red icon in the Weather/Energymeters list.
You will see the low battery warning when navigating to that device.
Fixed:
* For the iPad users, when viewing the Home screen, the content on the right side will now come back if the app was able to reconnect to a HomeWizard. Previously only the left side would return.
* The system sound should now be resumed again after our app plays a sound.
* Fixed a bug in the y-axis calculation of EnergyLink graphs that were too high at times.
* The event selection when configuring notifications has now been converted to a selectable list when needed. This fixes some issues for languages like French and German where the text did not fit properly.
* Fixed the log display of LoXX.
* The HUD should now appear correct again on iPad (no more weid rotation issues).
* The size of the divider lines on iPad which flowed over the content on the right side has been fixed. 2.9.8 12/28/2014 Release Notes 2.9.7
Features:
* We finally have iPhone 6 support after some hard work.
Though there are still a couple of issues lingering around, we are working hard to fix these. We ask for your patience.
* You can now replace an existing 433 MHz weather sensor with a new 868 MHz weather sensor.
This can be done by editing the 433 MHz sensor you want to replace and tapping on "Replace sensor".
Fixed:
* Crash when editing certain IP Switches.
* A bug with editing UDP/TCP commands.
* An issue with editing a dimmer in a scene.
* Various graph display issues on iPad when they are being shown in a popup.
* Water pressure that was being displayed as N/A when the value was between 0 and 1.
* Various display issues with IP Switches.
* Fullscreen camera view that was incorrectly displayed on iOS 8.
* The lines that were too long on iPad.
* An issue with editing your weather station message. 2.9.7 12/08/2014 Release notes 2.9.6
Features:
* Merged the thermometers into the Weather menu item.
* Added the filter blocks to the Weather view.
* Added support for new 868 weather sensors.
* Added support for the new Weather Station display.
* Added support for radiator valves.
* Added support for LoXX.
LoXX is displayed as a 'switch' to control the lock and under the Awareness menu item to view the status of the lock.
* Added support for Thinking Cleaner devices. (Acts like a virtual switch)
* Added support for new types of IP switches (HTTP POST, UDP, TCP, Wake on LAN)
Fixes:
* Fixed location sharing under the Shared Weather settings on iOS 8.
* Fixed a crash on iPad 1 with iOS 5 when trying to choose a color for a Hue lamp.
* Fixed a bug where the EnergyLink bar does not fill up properly.
* Fixed bug that prevented configuration of timers. 2.9.6 11/20/2014 iOS 2.9.4 release notes
Features:
* Added Shop menu item on iPhone/iPod devices. iPad device support will arrive with a future update.
* Added support for IP Switches, allowing you to assign url commands to the on/off buttons.
Fixed:
* Searching for locations under Shared Weather settings should now work again under iOS8.
* Fixed awareness sensor log display. 2.9.4 10/24/2014 Release 2.9.2
* Solved couple of issues:
* Fixed registering for notifications.
* Fixed editing sensors.
* Fixed marking sensors as favorite.
We are aware of a graphical issue with the navigation bar when viewing EnergyLink graphs and will fix this in a future update. 2.9.2 09/28/2014
Version 3.10.2
veröffentlicht am 2026-09-05
Version History This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu. 3.10.2 04/09/2018 * Adds lastSeen and lowBattery status to the Smartwares Door / Window sensor log screen 3.10.1 03/29/2018 ** A firmware update for the HomeWizard will follow in the coming days that adds these capabilities **
Features:
* Adds support for the Smartwares Door / Window sensor
It has all the same features of a regular contact sensor in the app.
* Adds support for the Smartwares Energy Socket
It has all the same features of a regular switch in the app.
* Adds support for the Smartwares Dimmer Socket
It has all the same features of a regular dimmer in the app.
The only major difference is that it is all controlled over 868 instead of 433. 3.10.0 03/23/2018 * Resolves a navigation bar rendering issue when running on iPhone X 3.9.1 12/06/2017 * Adds support for our new Remote
You can now pair it with the HomeWizard so that the remote
can be used to cycle between presets.
You can find it under the Switches & lights category.
When editing, all remotes are found at the top of the list
under the Switches and lights category in Manage Devices.
Important! Please be aware that due to the nature of the Remote, it
is added as a sensor and such is also bound to that sensor
limit and not that of the switches limit. So if you have
reached the limit of 20 kakusensors, then you must remove
a motion/light/contact/smoke/water or doorbell sensor and
not a switch.
* Fixes various translation issues.
* Fixed a number of memory issues. 3.9.0 08/21/2017 * Philips Hue Lights and the Connected LED Lights can now be controlled using the (previously Connected Color LED Light exclusive) color picker.
* This picker is accessible when tapping the color button on the Dashboard/Scene Detail views, when setting up an action and when adding such a device to a scene.
* It is now finally possible to store color presets for Philips Hue Lights, the values are shared between this and the Connected Color LED Lights.
* Modal views on iPad are now sliding in from the bottom instead of flipping in from the center.
* Less frequent error messages when interacting the the Color LED brightness slider.
* Fixes various bugs with Connected Color LED Lights. 3.8.2 04/25/2017 Improved support for Smartwares color LEDs 3.8.0 03/02/2017 Resolved issue with no snapshots for Smartwares Cameras 3.7.3 12/08/2016 - Compatibility with Smartwares Smart Lights and Smartwares Smoke detectors 3.7.1 08/24/2016 - Added support for Smartwares 868MHz smoke detector
- Added support for Foscam Cameras 9xxx Series
- Resolved EnergyLink Graphs issues
- Resolved issue with Phillips Hue support 3.7.0 05/31/2016 Improved the Apple Watch experience
Resolved a number of stability issues
Resolved issues with EnergyLink graphs 3.6.0 05/09/2016 New Features
- Added support for Connected LED Lights
- Added generic support for Foscam FI9xxx series cameras
- Increased maximum WP for solar panels
Bugs
- Resolved issues with linking between the Cameras App and Homewizard App
- Resolved issues with timezone handling
- Resolved a number of performance issues 3.5.0 03/07/2016 Added support for Smartwares IP cameras (powered by HomeWizard Easy Online)
Improved IP Camera UI controls
Improved Water detector UI
Improved text labels for curtains/blinds
Last version supporting iOS 5 devices 3.4.0 11/25/2015 New features
- Users can select the Geofence radius.
- Users can disable/enable the Geofence notifications.
- Enabled Geofence for iOS7 devices.
- Added support for Smartwares leakage detector. 3.3.0 09/28/2015 New Features
- Added Geofence functionality: automatically switch Presets based on your location. For more information please check http://homewizard.com/geofence
* This feature is only available on iOS devices running iOS 8 or higher (excluding iPad devices)
- Added Apple Watch app with Presets support: allows you to directly change Preset from your Apple Watch.
- Added the option to evaluate a Task at its start time.
Improvements
- Resolved a number of issues with IP cameras in Scenes. 3.2.0 08/21/2015 Features
* Improved Tasks view (previously Schedule)
We’ve implemented a number of changes to the interface to show (more) information in a better, more structured way.
The tasks are now grouped based on type and the time tasks are now ordered according to their start time.
The option to filter on preset has been added.
Also note that the Tasks menu item now only appears when all the necessary data has been fetched from your HomeWizard.
* Regrouped devices.
Implemented new categories and groupings of devices. For example, all Asun, Brel and Somfy devices are now under the Blinds and Curtains category.
* Improved managing your devices.
We’ve merged the Add and Edit devices into a single view called Manage Devices.
Fixes / Improvements:
* Improved iPhone 6 compatibility.
* Fixed Invited Smart Lock display on the Dashboard.
* Applied vibration and sound feedback when controlling Blinds and Curtains devices.
* Fixed a bug when toggling presets on the Dashboard while the app is still booting up.
* Tapping on an in-app notification will now also stop the sound again.
* Now accepting all characters for a coupon code.
* Added Curtains to the Blinds and Curtains category.
* When viewing a camera stream, we now by default start with the HD (RTSP) stream instead of the low quality MJPEG stream. 3.1.0 07/06/2015 * Added progress dialog when deleting sensors.
* Fixed an issue with editing code triggers.
* Menu button now always stays enabled.
* Fixed issue with deleting notification receivers under Account.
* Fixed a couple of crashes.
* Updated translations. 3.0.1 04/28/2015 New features and general improvements
* HomeWizard Presets: introduced the ability to set you HomeWizard into four different modes based on which you can truly program your house
* HomeWizard Tasks: if..then..based programmable events with multiple actions and notifications
* HomeWizard Schedule: comprehensive overview of all HomeWizard Tasks throughout the week
* Re-organized device grouping and categorization when adding devices
* New Account menu: all profile related activities grouped under one item
* Improved support for Invited Smart Locks
* Improved support for Brel Motors remotes
* Resolved issue with summer/winter times
* Resolved issue with Wattcher one-day statistics
* Resolved issue with wind speed measurement
* Resolved a number of small bugs and optimizations
* Resolved issue with actions for Somfy move-to-favourite-position
* Resolved issue with failure to fetch sensor data
* Resolved issue with incorrectly parsing log data for awareness sensors
* Added support for x64 bit devices
* Minimum iOS version required raised to 5.1.1 3.0.0 04/14/2015 * Fixed an issue with sharing you exact location using Shared Weather.
If you have experienced problems with your weather station not being positioned on the correct location on the map then please correct this using the following steps:
1) Go to Share Settings.
2) Tap on Location.
3) Wait for your location to be shown on the map and that "Share Exact Location" is turned on.
4) Tap the save button.
5) When back on the Share Settings screen, tap save again.
This should fix the issue.
Also, since the data is cached on our server it might take some time for the changes to be visible. This can take up to a day.
* Fixed various issues with parsing IP Switch urls.
* Fixed save button issues when editing IP Switches.
* Fixed an issue with the "my location" button on the Shared Weather Map on devices running iOS 8.
* Reverted upgrade of the VLC Media Library we use to playback video streams due to issues with the iPad 1 running iOS 5.
* Renamed LoXX to Invited Smart Lock.
* Fixed a couple of crashes. 2.9.10 03/04/2015 New Features
- Added support for Brel Curtains (http://www.brel-motors.nl/)
- Improved Loxx support and integration
Improvements
- Numerous application internal improvements
- Added x64 OS support
- Optimised IP Camera screens
- Resolved a number of issues with pop-ups in iPad
- Resolved a number of graphical issues for iPhone 6 and iPhone 6 Plus 2.9.9 01/27/2015 Release notes 2.9.8
Features:
* Improved iPhone 6 and iPhone 6 Plus support.
* Added sensor icons to the Home screen.
* Added low battery status for the 868 MHz weather sensors and the Wattcher.
This will be indicated by a small red icon in the Weather/Energymeters list.
You will see the low battery warning when navigating to that device.
Fixed:
* For the iPad users, when viewing the Home screen, the content on the right side will now come back if the app was able to reconnect to a HomeWizard. Previously only the left side would return.
* The system sound should now be resumed again after our app plays a sound.
* Fixed a bug in the y-axis calculation of EnergyLink graphs that were too high at times.
* The event selection when configuring notifications has now been converted to a selectable list when needed. This fixes some issues for languages like French and German where the text did not fit properly.
* Fixed the log display of LoXX.
* The HUD should now appear correct again on iPad (no more weid rotation issues).
* The size of the divider lines on iPad which flowed over the content on the right side has been fixed. 2.9.8 12/28/2014 Release Notes 2.9.7
Features:
* We finally have iPhone 6 support after some hard work.
Though there are still a couple of issues lingering around, we are working hard to fix these. We ask for your patience.
* You can now replace an existing 433 MHz weather sensor with a new 868 MHz weather sensor.
This can be done by editing the 433 MHz sensor you want to replace and tapping on "Replace sensor".
Fixed:
* Crash when editing certain IP Switches.
* A bug with editing UDP/TCP commands.
* An issue with editing a dimmer in a scene.
* Various graph display issues on iPad when they are being shown in a popup.
* Water pressure that was being displayed as N/A when the value was between 0 and 1.
* Various display issues with IP Switches.
* Fullscreen camera view that was incorrectly displayed on iOS 8.
* The lines that were too long on iPad.
* An issue with editing your weather station message. 2.9.7 12/08/2014 Release notes 2.9.6
Features:
* Merged the thermometers into the Weather menu item.
* Added the filter blocks to the Weather view.
* Added support for new 868 weather sensors.
* Added support for the new Weather Station display.
* Added support for radiator valves.
* Added support for LoXX.
LoXX is displayed as a 'switch' to control the lock and under the Awareness menu item to view the status of the lock.
* Added support for Thinking Cleaner devices. (Acts like a virtual switch)
* Added support for new types of IP switches (HTTP POST, UDP, TCP, Wake on LAN)
Fixes:
* Fixed location sharing under the Shared Weather settings on iOS 8.
* Fixed a crash on iPad 1 with iOS 5 when trying to choose a color for a Hue lamp.
* Fixed a bug where the EnergyLink bar does not fill up properly.
* Fixed bug that prevented configuration of timers. 2.9.6 11/20/2014 iOS 2.9.4 release notes
Features:
* Added Shop menu item on iPhone/iPod devices. iPad device support will arrive with a future update.
* Added support for IP Switches, allowing you to assign url commands to the on/off buttons.
Fixed:
* Searching for locations under Shared Weather settings should now work again under iOS8.
* Fixed awareness sensor log display. 2.9.4 10/24/2014 Release 2.9.2
* Solved couple of issues:
* Fixed registering for notifications.
* Fixed editing sensors.
* Fixed marking sensors as favorite.
We are aware of a graphical issue with the navigation bar when viewing EnergyLink graphs and will fix this in a future update. 2.9.2 09/28/2014
Version 3.10.2
veröffentlicht am 2026-08-11
Version History This update from Apple will improve the functionality of this app. No new features are included.
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu. 3.10.2 04/09/2018 * Adds lastSeen and lowBattery status to the Smartwares Door / Window sensor log screen 3.10.1 03/29/2018 ** A firmware update for the HomeWizard will follow in the coming days that adds these capabilities **
Features:
* Adds support for the Smartwares Door / Window sensor
It has all the same features of a regular contact sensor in the app.
* Adds support for the Smartwares Energy Socket
It has all the same features of a regular switch in the app.
* Adds support for the Smartwares Dimmer Socket
It has all the same features of a regular dimmer in the app.
The only major difference is that it is all controlled over 868 instead of 433. 3.10.0 03/23/2018 * Resolves a navigation bar rendering issue when running on iPhone X 3.9.1 12/06/2017 * Adds support for our new Remote
You can now pair it with the HomeWizard so that the remote
can be used to cycle between presets.
You can find it under the Switches & lights category.
When editing, all remotes are found at the top of the list
under the Switches and lights category in Manage Devices.
Important! Please be aware that due to the nature of the Remote, it
is added as a sensor and such is also bound to that sensor
limit and not that of the switches limit. So if you have
reached the limit of 20 kakusensors, then you must remove
a motion/light/contact/smoke/water or doorbell sensor and
not a switch.
* Fixes various translation issues.
* Fixed a number of memory issues. 3.9.0 08/21/2017 * Philips Hue Lights and the Connected LED Lights can now be controlled using the (previously Connected Color LED Light exclusive) color picker.
* This picker is accessible when tapping the color button on the Dashboard/Scene Detail views, when setting up an action and when adding such a device to a scene.
* It is now finally possible to store color presets for Philips Hue Lights, the values are shared between this and the Connected Color LED Lights.
* Modal views on iPad are now sliding in from the bottom instead of flipping in from the center.
* Less frequent error messages when interacting the the Color LED brightness slider.
* Fixes various bugs with Connected Color LED Lights. 3.8.2 04/25/2017 Improved support for Smartwares color LEDs 3.8.0 03/02/2017 Resolved issue with no snapshots for Smartwares Cameras 3.7.3 12/08/2016 - Compatibility with Smartwares Smart Lights and Smartwares Smoke detectors 3.7.1 08/24/2016 - Added support for Smartwares 868MHz smoke detector
- Added support for Foscam Cameras 9xxx Series
- Resolved EnergyLink Graphs issues
- Resolved issue with Phillips Hue support 3.7.0 05/31/2016 Improved the Apple Watch experience
Resolved a number of stability issues
Resolved issues with EnergyLink graphs 3.6.0 05/09/2016 New Features
- Added support for Connected LED Lights
- Added generic support for Foscam FI9xxx series cameras
- Increased maximum WP for solar panels
Bugs
- Resolved issues with linking between the Cameras App and Homewizard App
- Resolved issues with timezone handling
- Resolved a number of performance issues 3.5.0 03/07/2016 Added support for Smartwares IP cameras (powered by HomeWizard Easy Online)
Improved IP Camera UI controls
Improved Water detector UI
Improved text labels for curtains/blinds
Last version supporting iOS 5 devices 3.4.0 11/25/2015 New features
- Users can select the Geofence radius.
- Users can disable/enable the Geofence notifications.
- Enabled Geofence for iOS7 devices.
- Added support for Smartwares leakage detector. 3.3.0 09/28/2015 New Features
- Added Geofence functionality: automatically switch Presets based on your location. For more information please check http://homewizard.com/geofence
* This feature is only available on iOS devices running iOS 8 or higher (excluding iPad devices)
- Added Apple Watch app with Presets support: allows you to directly change Preset from your Apple Watch.
- Added the option to evaluate a Task at its start time.
Improvements
- Resolved a number of issues with IP cameras in Scenes. 3.2.0 08/21/2015 Features
* Improved Tasks view (previously Schedule)
We’ve implemented a number of changes to the interface to show (more) information in a better, more structured way.
The tasks are now grouped based on type and the time tasks are now ordered according to their start time.
The option to filter on preset has been added.
Also note that the Tasks menu item now only appears when all the necessary data has been fetched from your HomeWizard.
* Regrouped devices.
Implemented new categories and groupings of devices. For example, all Asun, Brel and Somfy devices are now under the Blinds and Curtains category.
* Improved managing your devices.
We’ve merged the Add and Edit devices into a single view called Manage Devices.
Fixes / Improvements:
* Improved iPhone 6 compatibility.
* Fixed Invited Smart Lock display on the Dashboard.
* Applied vibration and sound feedback when controlling Blinds and Curtains devices.
* Fixed a bug when toggling presets on the Dashboard while the app is still booting up.
* Tapping on an in-app notification will now also stop the sound again.
* Now accepting all characters for a coupon code.
* Added Curtains to the Blinds and Curtains category.
* When viewing a camera stream, we now by default start with the HD (RTSP) stream instead of the low quality MJPEG stream. 3.1.0 07/06/2015 * Added progress dialog when deleting sensors.
* Fixed an issue with editing code triggers.
* Menu button now always stays enabled.
* Fixed issue with deleting notification receivers under Account.
* Fixed a couple of crashes.
* Updated translations. 3.0.1 04/28/2015 New features and general improvements
* HomeWizard Presets: introduced the ability to set you HomeWizard into four different modes based on which you can truly program your house
* HomeWizard Tasks: if..then..based programmable events with multiple actions and notifications
* HomeWizard Schedule: comprehensive overview of all HomeWizard Tasks throughout the week
* Re-organized device grouping and categorization when adding devices
* New Account menu: all profile related activities grouped under one item
* Improved support for Invited Smart Locks
* Improved support for Brel Motors remotes
* Resolved issue with summer/winter times
* Resolved issue with Wattcher one-day statistics
* Resolved issue with wind speed measurement
* Resolved a number of small bugs and optimizations
* Resolved issue with actions for Somfy move-to-favourite-position
* Resolved issue with failure to fetch sensor data
* Resolved issue with incorrectly parsing log data for awareness sensors
* Added support for x64 bit devices
* Minimum iOS version required raised to 5.1.1 3.0.0 04/14/2015 * Fixed an issue with sharing you exact location using Shared Weather.
If you have experienced problems with your weather station not being positioned on the correct location on the map then please correct this using the following steps:
1) Go to Share Settings.
2) Tap on Location.
3) Wait for your location to be shown on the map and that "Share Exact Location" is turned on.
4) Tap the save button.
5) When back on the Share Settings screen, tap save again.
This should fix the issue.
Also, since the data is cached on our server it might take some time for the changes to be visible. This can take up to a day.
* Fixed various issues with parsing IP Switch urls.
* Fixed save button issues when editing IP Switches.
* Fixed an issue with the "my location" button on the Shared Weather Map on devices running iOS 8.
* Reverted upgrade of the VLC Media Library we use to playback video streams due to issues with the iPad 1 running iOS 5.
* Renamed LoXX to Invited Smart Lock.
* Fixed a couple of crashes. 2.9.10 03/04/2015 New Features
- Added support for Brel Curtains (http://www.brel-motors.nl/)
- Improved Loxx support and integration
Improvements
- Numerous application internal improvements
- Added x64 OS support
- Optimised IP Camera screens
- Resolved a number of issues with pop-ups in iPad
- Resolved a number of graphical issues for iPhone 6 and iPhone 6 Plus 2.9.9 01/27/2015 Release notes 2.9.8
Features:
* Improved iPhone 6 and iPhone 6 Plus support.
* Added sensor icons to the Home screen.
* Added low battery status for the 868 MHz weather sensors and the Wattcher.
This will be indicated by a small red icon in the Weather/Energymeters list.
You will see the low battery warning when navigating to that device.
Fixed:
* For the iPad users, when viewing the Home screen, the content on the right side will now come back if the app was able to reconnect to a HomeWizard. Previously only the left side would return.
* The system sound should now be resumed again after our app plays a sound.
* Fixed a bug in the y-axis calculation of EnergyLink graphs that were too high at times.
* The event selection when configuring notifications has now been converted to a selectable list when needed. This fixes some issues for languages like French and German where the text did not fit properly.
* Fixed the log display of LoXX.
* The HUD should now appear correct again on iPad (no more weid rotation issues).
* The size of the divider lines on iPad which flowed over the content on the right side has been fixed. 2.9.8 12/28/2014 Release Notes 2.9.7
Features:
* We finally have iPhone 6 support after some hard work.
Though there are still a couple of issues lingering around, we are working hard to fix these. We ask for your patience.
* You can now replace an existing 433 MHz weather sensor with a new 868 MHz weather sensor.
This can be done by editing the 433 MHz sensor you want to replace and tapping on "Replace sensor".
Fixed:
* Crash when editing certain IP Switches.
* A bug with editing UDP/TCP commands.
* An issue with editing a dimmer in a scene.
* Various graph display issues on iPad when they are being shown in a popup.
* Water pressure that was being displayed as N/A when the value was between 0 and 1.
* Various display issues with IP Switches.
* Fullscreen camera view that was incorrectly displayed on iOS 8.
* The lines that were too long on iPad.
* An issue with editing your weather station message. 2.9.7 12/08/2014 Release notes 2.9.6
Features:
* Merged the thermometers into the Weather menu item.
* Added the filter blocks to the Weather view.
* Added support for new 868 weather sensors.
* Added support for the new Weather Station display.
* Added support for radiator valves.
* Added support for LoXX.
LoXX is displayed as a 'switch' to control the lock and under the Awareness menu item to view the status of the lock.
* Added support for Thinking Cleaner devices. (Acts like a virtual switch)
* Added support for new types of IP switches (HTTP POST, UDP, TCP, Wake on LAN)
Fixes:
* Fixed location sharing under the Shared Weather settings on iOS 8.
* Fixed a crash on iPad 1 with iOS 5 when trying to choose a color for a Hue lamp.
* Fixed a bug where the EnergyLink bar does not fill up properly.
* Fixed bug that prevented configuration of timers. 2.9.6 11/20/2014 iOS 2.9.4 release notes
Features:
* Added Shop menu item on iPhone/iPod devices. iPad device support will arrive with a future update.
* Added support for IP Switches, allowing you to assign url commands to the on/off buttons.
Fixed:
* Searching for locations under Shared Weather settings should now work again under iOS8.
* Fixed awareness sensor log display. 2.9.4 10/24/2014 Release 2.9.2
* Solved couple of issues:
* Fixed registering for notifications.
* Fixed editing sensors.
* Fixed marking sensors as favorite.
We are aware of a graphical issue with the navigation bar when viewing EnergyLink graphs and will fix this in a future update. 2.9.2 09/28/2014
Version 3.10.2
veröffentlicht am 2018-04-09
This app has been updated by Apple to display the Apple Watch app icon.
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu.
Version 3.10.2
veröffentlicht am 2018-04-09
9 Apr 2018 Version 3.10.2
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu.
Version 3.10.2
veröffentlicht am 2018-04-09
Apr 9, 2018 Version 3.10.2
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu.
Version 3.10.2
veröffentlicht am 2018-04-09
Apr 9, 2018 Version 3.10.2
This app has been updated by Apple to use the latest Apple signing certificate.
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu.
Version 3.10.2
veröffentlicht am 2018-04-09
Apr 9, 2018 Version 3.10.2
This app has been updated by Apple to display the Apple Watch app icon.
* Disables the shop in app feature. You will now be redirected to our shop in you web-browser after tapping the shop row in the menu.
Version 3.7.1
veröffentlicht am 2011-10-02
Haftungsausschluss
Offizieller App Store-Link
Wir hosten HomeWizard nicht auf unseren Servern. Wir haben es nicht auf Viren, Adware, Spyware oder andere Arten von Malware gescannt. Diese App wird von Apple gehostet und hat deren Allgemeine Geschäftsbedingungen erfüllt, um dort gelistet zu werden. Wir empfehlen Vorsicht bei der Installation.
Der App-Store-Link für HomeWizard wird Ihnen von apps112.com ohne jegliche Zusicherungen, Gewährleistungen oder Garantien zur Verfügung gestellt, greifen Sie daher auf eigene Gefahr darauf zu.
Bei Fragen zu dieser speziellen App wenden Sie sich bitte direkt an den Herausgeber. Bei Fragen zu den Funktionalitäten von apps112.com kontaktieren Sie uns.



